Wellspring is composed of hollow fiber
membrane, activated carbon and pretreatment filter. Like all other water
purifier, each filter can be used for a different period of time. But the
difference is that customer can replace and cleanse filters in Wellspring by
themselves.
Hollow fiber membrane can be used
semi-permanently if it is well preserved.
Below are the proper methods.
1.
Proper choice of raw water:
rain water, ground water which is already pretreated and ground water which is
not contaminated from heavy metal or arsenic.
2.
Pretreatment of raw water: if
the raw water contains a lot of floating particles, pretreat the water with a
cloth before using Wellspring.
3.
Proper backwashing at a proper
time: backwash Wellspring with clean water two or three times a week.
4.
Dehydration and freeze
protection: when not using Wellspring for a long time, keep Wellspring soaked in
a sealed plastic bag.
5.
Microorganism management: avoid
direct sunlight and keep it in a refrigerator so that microorganism cannot
self-reproduce.
Even after proper management, consider that
pollution level of water is different and it is hard to analyze for users, so
we recommend to use hollow fiber membrane for 2 years for a family of four
assuming that the family use Wellspring for producing drinking water.
Activated carbon(AF) is influenced by
concentration of organic matter in raw water. It can filter up to 500L but it
depends on raw water. There is no additional way to check the proper time to
replace the filter so when you taste or smell bad, something please replace
filter.
Pretreatment filter(DF) should be replaced
when AF is replaced.
댓글 없음:
댓글 쓰기